Samsung Tv: Dvb Select Type Error
The DVB select type error on Samsung TVs usually occurs when the TV is unable to detect or decode the DVB signal properly. This can be caused by a variety of factors, including:
Based on user reports, the error typically pops up due to one of these main issues:
| Aspect | Experience | |--------|-------------| | | Occurs 1–2 times per year, or after any antenna/signal change | | Ease of fix | Moderate – requires knowing your broadcast type | | Official support | Poor – Samsung forums have many unresolved threads | | Fix permanence | Usually permanent unless signal changes again |
The coaxial cable connecting your antenna or wall outlet to the TV has wiggled free. dvb select type error samsung tv
Are you using a or a cable box with your TV? What to do when you encounter error on Samsung TV Smarthub?
Ensure the satellite dish cable is securely attached to the "Sub" or "Main" port (usually for DVB-S).
button on your remote to ensure you are back at the home screen. Check Signal Type The DVB select type error on Samsung TVs
If your antenna cable passes through a signal splitter before reaching the TV, bypass it temporarily. Connect the antenna directly to the TV to rule out signal degradation.
If you are using a standard digital antenna.
Samsung TVs use different DVB configurations depending on how you get your channels: What to do when you encounter error on Samsung TV Smarthub
Work through these troubleshooting steps in order, from the simplest fix to the most advanced. 1. Perform a Cold Boot (Hard Reset)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
If you use an external set-top box (like a Sky, Virgin, or Comcast box) connected via an HDMI cable, your TV shouldn't be searching for DVB channels at all. Press the button on your remote and switch the input to the specific HDMI port where your box is connected. Perform a Factory Reset