V2000-c Rfid Access Control User Manual -

Connect the wire of the V2000-C directly to the Positive (+) terminal of the Electric Strike. 3. Programming and Configuration Guide

Secure the backplate to the wall using the provided anchors and screws, then attach the main controller housing. Terminal Wiring Code Reference The trailing wire harness on the back of the Go to product viewer dialog for this item. connects according to the following color and pin standard: Positive 12VDC Power Supply Input GND (Black): Negative Ground Return line V2000-c Rfid Access Control User Manual

Press * (The indicator light returns to normal). Changing the Master Code Enter Programming Mode. Connect the wire of the V2000-C directly to

You can configure how users authenticate themselves to gain entry. In programming mode, press 3 + 0 + # . Terminal Wiring Code Reference The trailing wire harness

Drill a center hole through the mounting surface to cleanly route the connection cable harness.