Thyssenkrupp Levant Stair Lift Installation Manual Full !free! Jun 2026

A successful installation begins long before any tools are used.

Confirm the staircase angle is between 28° and 53° . Check for obstructions like radiators or doorways at the top and bottom.

: Adjust the sensors so the lift stops level with the floors. thyssenkrupp levant stair lift installation manual full

This comprehensive guide serves as an reference overview of the installation process, alignment procedures, and troubleshooting protocols typically found in the official technical manual. 1. Pre-Installation and Site Inspection

Clean the aluminum rail using a dry, lint-free cloth to remove dust and pet hair. Test the operation of the seatbelt buckle. Verify all safety edges stop the lift when pressed. Every 6 Months A successful installation begins long before any tools

: Lay out the silver track segments and ensure the charging contacts are aligned. Bracket Anchoring

Install the upper and lower mechanical end stops immediately. : Adjust the sensors so the lift stops level with the floors

Connect the safety sensors on the footrest and carriage. These prevent the unit from moving if something is obstructing the staircase. 4. Final Setup and Calibration