Tdv26 Instruction Manual !!link!! -

Connect the 3.5mm audio jack end into your phone, laptop, or tablet headphone jack. Press the button until the screen reads LINE or AUX .

Complete TDV26 Digital Mini Speaker Instruction Manual and Guide

A: Yes. You can use the TD-V26 as a card reader. Plug a USB cable into the device's standard USB port (where you would plug a USB stick) and the other end into your computer. The computer should recognize the inserted microSD card as a removable drive. tdv26 instruction manual

Toggle switch to power the device completely on or off. Button Control Matrix Button Label Short Press Function Long Press Function ◀◀ / VOL- Previous Track / Previous Saved Radio Station Decrease Volume Level ▶▶ / VOL+ Next Track / Next Saved Radio Station Increase Volume Level 3. Step-by-Step Operating Instructions Powering On & Basic Charging

If using AUX mode, increase the volume on your phone or computer. Connect the 3

Before operating your speaker, review its primary core hardware specifications: 5 x 5 x 5 cm (Aluminum Alloy shell) Frequency Response: 150 – 1800 Hz Signal-to-Noise Ratio (Amplifier): ≥is greater than or equal to Battery Capacity: 600 mAh (Lithium-ion) Input Voltage: 5V DC (via Mini USB) Supported File Systems: FAT16 / FAT32 Audio Formats: MP3 Anatomy and Port Configurations

The device is controlled by four main buttons, with the following functions: You can use the TD-V26 as a card reader

⭐⭐⭐☆☆ (3/5)

Press and hold the button for 3 seconds to initiate the auto-scan feature.