Keyence Gs-11pc Manual !!link!!

Technical Features and Design At its core, the GS-11PC is engineered for dependable object detection in tight or visually cluttered environments. Its compact housing allows placement in constrained spaces where larger sensors would be impractical. Typically, Keyence sensors in this class offer both diffuse and through-beam configurations, high-intensity LED light sources for stable outputs, and adjustable sensitivity to accommodate varying target reflectivity. The GS-11PC’s connector options and mounting flexibility minimize downtime during retrofits or line reconfigurations, enabling straightforward integration with existing control systems.

Ensure the distance between the sensor face and actuator face stays within the rated sensing range (typically 5 mm to 15 mm).

The Keyence GS-11PC is designed for demanding industrial environments. According to the , the sensor offers: keyence gs-11pc manual

is designed for straightforward wiring. It features two OSSD safety outputs, which allow it to be connected directly to a safety circuit, often eliminating the need for a separate safety interlock relay or control box. M12 8-pin connector.

18;write_to_target_document7;default0;eec;18;write_to_target_document1a;_fpLuaaPXLJOMnesPsbvS-A8_20;703; Technical Features and Design At its core, the

| Specification | Details | | :--- | :--- | | | Standard type (Non-contact) | | Output Type | PNP | | Connector | M12 connector with 0.3 m pigtail cable | | Core Count | 8 cores (Brown, Blue, Black, White, Red/Black, Red/White, Gray, Light Blue) | | Operating Distance (Front) | Sao (OFF→ON): 10 mm, Sar (ON→OFF): 18 mm | | Operating Distance (Side) | Sao (OFF→ON): 6 mm, Sar (ON→OFF): 14 mm | | Response Time | 20 ms + 2 ms × (cascaded units - 1) for detection to non-detection | | Control Output (OSSD) | 2 transistor outputs, max load current 150 mA | | Supply Voltage | 24 VDC ±20% (Class 2) | | Power Consumption | 0.8 W | | Enclosure Rating | IP65, IP67, IP69K, NEMA Type 3/4X/12/13 | | Operating Temperature | -20°C to +55°C | | Applicable Standards | ISO 13849-1 (PLe, Cat. 4), IEC 61508 (SIL3), etc. | | Weight | Approx. 80 g |

Have a specific application question about the GS-11PC? Drop a comment below or reach out to your local Keyence rep for application-specific support! According to the , the sensor offers: is

0;ad9; Use the standard M12 connector. If indicators flash red/green, check for incorrect wiring (specifically the red/black and red/white wires).

The device must be installed in accordance with local, state, and national regulations.

Fix the sensor to the stationary frame and the actuator to the moving guard (door).