guru 2007 filmyzilla Peter's electronic projects

Guru 2007 Filmyzilla ~upd~ -

v4.2 designed by Peter JAKAB in 2004-2005
old version in December, 1999
NOTE for beginners: PICs are general purpose microcontrollers which have to be programmed before you can use them in the actual circuit! Check out this link to learn more.

Configure > Test > Download

transmitter receiver
guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla
guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla guru 2007 filmyzilla
output ch# type state
K1
L M  
K2
L M  
K3
L M  
K4
L M  
K5
L M  
K6
L M  
K7
L M  
K8
L M  
receiver output types: L=latched output, M=momentary output
media:
IR modulation frequency:

Control up to 8 devices by this easy constructable remote control. It can work as a radio or infrared remote control, depending on the components. Each device output can be configured to be momentary (turned on while you press the button) or latched. Latched outputs can be toggled on/off by one button per channel, or turned on and off by two buttons per channel.

guru 2007 filmyzilla Try it now, before building! Click on the transmitter buttons with the green labels on the left and see how the receiver outputs (K1-K8) change. Change the number of transmitter or receiver channels. Switch the receiver output type between latched and momentary.

Containing a PIC microcontroller, the circuit is very flexible. You can decide which receiver outputs are latched and which are momentary. The Manchester-coded transmitter output is well suited for the cheapest ASK radio modules or for infrared control. The units are configurable to a unique address, which must match to control the devices.

Related project: Learning remote control receiver
Take your existing remote control and control everything with it. This receiver can learn codes from an RC-5 format IR remote control, and associate the buttons to different channels and actions.

Related project: 2^16 remote control encoder and decoder
If you have TTL signals to control remote digital output lines, please check this project instead.

If you have trouble with programming PIC microcontrollers, you can consider builing other circuits based on Holtek HT-12D, HT-12E, Princeton PT2262, PT2272 and Motorola MC145026, MC145027, MC145028 encoders/decoders.
image gallery

4/8-channel V4.2 radio transmitter

radio remote control transmitter schematic
The difference between the 4-channel and the 8-channel version is only the software inside. The 8-channel transmitter has one button (S1-S8) per channel. The 4-channel transmitter uses S1-S4 buttons to turn on, S5-S8 buttons to turn off channel 1-4 (use with latched outputs on the receiver). The D1-D4 diodes and J1-J4 jumpers are optional, and are used to setup the transmitter address. Higher supply voltage results higher transmit power, but V+ range is 2-5.5VDC for the PIC MCU. When V+ is higher than 5VDC, use separate power for the mcu.

Configure & download
What if you can't get a pic16f630?
  parts list
part description
C1
100nF ceramic capacitor
R1
10k resistor (1/8W)
D1-D4 1N4148 diode (optional)
S1-S8
tact switch, DTSM 61N or similar
IC1 PIC16F630 or PIC16F676 microcontroller, pre-programmed
TXMOD
radio transmitter module, see text (hardware)
B1
battery between 2-5.5VDC (check TXMOD specs for valid voltage range)

4/8-channel V4.2 infrared transmitter

infrared remote control transmitter schematic
The difference between the 4-channel and the 8-channel version is only the software inside. The 8-channel transmitter has one button (S1-S8) per channel. The 4-channel transmitter uses S1-S4 buttons to turn on, S5-S8 buttons to turn off channel 1-4 (use with latched outputs on the receiver). The D1-D4 diodes and J1-J4 jumpers are optional, and are used to setup the transmitter address. V+ supply voltage should be between 2.5-5.5VDC. It is practical to use two or three AAA batteries.

Configure & download
  parts list
part description
C1
100nF ceramic capacitor
C2
470 uF 6.3V, electrolytic capacitor
R1
10k resistor (1/8W)
R2
10 ohm resistor (1/4W)
D1-D4 1N4148 diode (optional)
D5
IR transmitter LED
Q1
BSS138 or similar N-MOSFET
S1-S8
tact switch, DTSM 61N or similar
IC1 PIC16F684 microcontroller, pre-programmed
B1
battery between 2-5.5VDC (CR2032, 3.6V LiIon battery or 3xAA batteries)

4/8-channel V4.2 radio receiver

The difference between the 4-channel and the 8-channel version is only the software inside. The 8-channel receiver outputs are individually configurable for latched or momentary output. The 4-channel receiver has two outputs per channel: K1-K4 are latched outputs, K5-K8 are momentary outputs for the four channels. The "valid" LED shows the transmitter activity. Make sure to turn on all address switches when the transmitter diodes are absent, or the J1-J4 jumpers are cut. Choose V+ supply voltage between +6-15VDC, based on the relay voltage ratings. For 6V relays, use +6VDC, for 12V relays use +12VDC.

please observe the corresponding address configuration!
guru 2007 filmyzilla
transmitter:
no diodes connected
guru 2007 filmyzilla
receiver:
switches all ON
guru 2007 filmyzilla
transmitter:
all diodes connected
guru 2007 filmyzilla
receiver:
switches all OFF

Configure & download
Zoom the picture
radio remote control receiver schematic

component pinouts

parts list

part description
C1, C2 22pF ceramic capacitor
C3, C5 100nF ceramic capacitor
C6 10uF 6.3V electrolytic capacitor
CN1-CN8 PCB terminal block, 3-way (DG301)
D1-D8 1N4004 diode
IC1 PIC16F627 or PIC16F628 or
PIC16F627A or PIC16F628A microcontroller, pre-programmed
IC2 LP2950CZ5.0 voltage regulator
LED 3mm LED (green)
LED1-LED8 3mm LED (red)
Q1-Q8 BS170 N-channel mosfet transistor
R1-R9 220R resistor (1/8W)
RL1-RL8 G5LE relay, see text for coil voltage selection
S1 piano DIP switch, 4-way
X1 4MHz HC49 crystal
RXMOD 3-pin radio receiver module, see text (hardware)

4/8-channel V4.2 infrared receiver

The difference between the 4-channel and the 8-channel version is only the software inside. The 8-channel receiver outputs are individually configurable for latched or momentary output. The 4-channel receiver has two outputs per channel: K1-K4 are latched outputs, K5-K8 are momentary outputs for the four channels. The "valid" LED shows the transmitter activity. Make sure to turn on all address jumpers when the transmitter diodes are absent, or the J1-J4 jumpers are cut. Choose V+ supply voltage between +6-15VDC, based on the relay voltage ratings. For 6V relays, use +6VDC, for 12V relays use +12VDC.

please observe the corresponding address configuration!
guru 2007 filmyzilla
transmitter:
no diodes connected
guru 2007 filmyzilla
receiver:
switches all ON
guru 2007 filmyzilla
transmitter:
all diodes connected
guru 2007 filmyzilla
receiver:
switches all OFF

Configure & download
Zoom the picture
infrared remote control receiver schematic

Guru 2007 Filmyzilla ~upd~ -

, following the 30-year rise of a small-town man to a textile tycoon. The film is widely praised for several key elements: Stellar Lead Performance

Released on January 12, 2007, Guru is a biographical drama widely understood to be inspired by the meteoric rise of the legendary Indian industrial tycoon, , the founder of Reliance Industries. The Synopsis

At its heart, Guru is a biographical drama inspired by the life of the legendary Indian business magnate Dhirubhai Ambani, the founder of Reliance Industries. The film follows the journey of Gurukant Desai (played by Abhishek Bachchan), a young, ambitious man from the small village of Idhar in Gujarat. Frustrated by his father's pessimism, Gurukant travels to Turkey to work in the spice trade before returning to India with a grand vision: to establish his own textile business. Along the way, he marries the beautiful Sujata (Aishwarya Rai) for her dowry, and navigates the murky waters of India's corporate world, often using questionable means to achieve his ends. guru 2007 filmyzilla

At 166 minutes, the second half drags slightly, especially during the legal battle sequences.

While many users search for the film on platforms like , it is important to note that these are unauthorized piracy websites. Accessing content through such platforms can expose devices to security risks and does not support the creators of the film. For a safe and high-quality experience, users are encouraged to watch Guru on official streaming platforms like Netflix or Amazon Prime Video. , following the 30-year rise of a small-town

The Legacy of Mani Ratnam’s Guru (2007) and the Reality of Digital Piracy Sites Like Filmyzilla

As for Filmyzilla, it's a popular online platform that provides Bollywood movie downloads and streaming services. However, I must emphasize that downloading or streaming copyrighted content without permission is illegal and can lead to penalties. The film follows the journey of Gurukant Desai

user wants a long article about "guru 2007 filmyzilla". This likely refers to the 2007 Bollywood film "Guru" and its availability on the piracy website Filmyzilla. The article should be informative, covering the film's details, the piracy issue, legal alternatives, and the impact of piracy. I need to gather information about the film, Filmyzilla, and related topics. I will follow the search plan. have gathered initial search results for the film, Filmyzilla, legal alternatives, and piracy impact. Now I need to open the most relevant pages to extract detailed information. I will open the Wikipedia pages for the film and its awards, the Wikipedia page for Filmyzilla, the article on Filmyzilla mirrors, and the JustWatch page for legal streaming options. have gathered information about the film, Filmyzilla, and legal alternatives. Now I need to write a comprehensive article. The article will cover the film's details, the issue of piracy, legal ways to watch the film, the impact of piracy, and frequently asked questions. I will cite the sources I have collected. Now I will start writing the article. search for "Guru 2007 filmyzilla" reflects a common yet problematic trend: the desire to access a beloved film through unofficial channels. While the platform Filmyzilla may promise free downloads, this article will provide a comprehensive look at the film, highlight the significant legal and cybersecurity dangers of piracy, and guide you towards safe and legal ways to enjoy this cinematic classic.

Ratnam masterfully balanced a grand corporate saga with intimate human relationships, creating a template for modern Indian biopics. Understanding the "Filmyzilla" Phenomenon

If you are looking for specific ? Share public link

The film is regularly available on major streaming libraries such as Netflix , Amazon Prime Video , or JioCinema (availability depends on your geographic region).

hardware

The radio version circuit diagrams show generic ISM RF modules, which connect to the circuits using two power pins and one modulation pin. The transmitter (TX) module is connected to the transmitter circuit. The receiver (RX) module is connected to the receiver circuit. Choose ISM RF modules from the list of modules. The remote control works with the cheapest OOK/ASK modules and with FSK modules, too. Use the same frequency and modulation type for all modules. Choose a module which doesn't need setup - these are which connect only using 3 pins (ground (GND), power supply (VCC), modulation in/demod out (MOD) ) and usually have an external antenna (ANT) connection.

If you are building the infrared version, choose an IR LED matching the wavelength of the receiver module. The receiver center frequency should match the transmitter modulation frequency, which can be set the transmitter source (pwm_freq). If in doubt, just choose a TSOP1738. A list of usable modules: Sharp GP1U52X, IS1U60L, Vishay TSOP17XX, TSOP18XX.

FAQ

Q: Do I have to use a bs170 transistor in the receiver?
A: You can use other logic N-channel mosfets or npn bipolar transistors (with a series base resistor added) to drive the relays in place of Q1-Q8 of the remote control receiver. Examples: bss138, bc182+2.2kohm

Q: How do I set toggle or momentary mode for the relays?
A: Make a modification in the receiver source code. Modify the LATCH_MASK define - this contains one bit for every channel. A zero bit sets the corresponding output to momentary, a high bit sets the corresponding output to latched. For example, the line LATCH_MASK EQU B'00001111' sets channels 8-5 to momentary and channels 4-1 to latched (toggle) mode. Then use the compiler (MPLAB or gputils) to assemble the code.

Q: I want to control multiple outputs by pressing button 2 and 3 at the same time. Is that possible?
A: Not with this project. Please use this 2^16 remote control encoder and decoder instead.

Q: What if I can't get a pic16f630?
A1: Try a pic16f676, and put this line back into code: clrf 0x91 ; ANSEL
A2: Try a pic16f628, here is the modified transmitter

Q: What radio modules can this remote control work with?
A: You can choose from this list. The remote control works with the cheapest OOK/ASK modules and with FSK modules, too. Use the same frequency and modulation type for all modules. Choose a module which doesn't need setup - these are which connect only using 3 pins (ground (GND), power supply (VCC), modulation in/demod out (MOD) ) and usually have an external antenna (ANT) connection.

references