The GE 532641L3 allows for multiple automated cycles per day.
: Detach the wall plate and old switch. Identify your wires: Black : Line (Hot incoming power). Red : Load (Outgoing power to the light fixture). White : Neutral. Green/Bare Copper : Ground. Connect Wires : Use wire nuts to secure the connections. Connect the timer’s Black wire to the Line wire. Connect the timer’s Red wire to the Load wire.
: Clean the sensor lens; dirt can "trick" the sensor into thinking it is dark. ge timer switch 532641l3 instruction manual pdf pdf install
| Problem | Likely Cause | Fix | |--------|--------------|------| | Load won’t turn on | No neutral wire connected to terminal 3 | Connect white neutral | | Timer runs but load stays on | Tripper pins missing or misaligned | Push pins firmly into slots | | Buzzing noise | Loose terminal connection | Torque screws to 12-14 in-lbs | | Dial doesn’t move | Defective motor or wrong voltage | Check for 120V between terminal 1 and neutral | | Load cycles rapidly | Override switch in wrong position | Set to “Timer” not “ON” | | Overheating | Exceeded inductive rating (e.g., large pump) | Replace with contactor + timer relay |
– These often host scanned originals (use with caution for malware): The GE 532641L3 allows for multiple automated cycles per day
Press and hold the or Set button until the digits flash.
Tell me which part of the setup is giving you trouble, and I can walk you through the fix. Red : Load (Outgoing power to the light fixture)
The GE Timer Switch 532641L3 is a 7-day timer switch that allows you to program up to 8 on/off cycles per day. It features a large LCD display, easy-to-use buttons, and a battery backup system that retains your settings in case of a power outage. This timer switch is compatible with a wide range of electrical devices, including incandescent, fluorescent, and LED lighting, as well as HVAC systems and appliances.
Download and save the PDF to your phone or tablet before starting your project. You won’t want to search for it again with dirt on your hands.
While holding , press the MIN button to set the current minutes.