Equatech Universal Tv Wall Mount 32 To 100 Instructions -

Use your level again to ensure the plate is perfectly horizontal before fully tightening the bolts. Step 4: Hang the TV

Now that your TV is safely on the wall, you can optimize your viewing angle.

With the brackets on the TV and the wall plate secured, it is time to bring the two parts together. equatech universal tv wall mount 32 to 100 instructions

Tighten all screws and bolts to ensure a secure mounting solution.

Before you begin, it's essential to familiarize yourself with your mount's components. The Equatech mount is a universal design, which means it comes with a variety of hardware to fit most plasma, LCD, and LED flat-screen TVs from 32" to 100". Use your level again to ensure the plate

This is the foundation of your entire setup. Get it right, and the rest is easy.

: Supports screen sizes from 32" to 100" and is compatible with most widescreen TV types. Tighten all screws and bolts to ensure a

VESA refers to the standard four-hole matrix on the back of your TV. Measure the distance between the horizontal holes and the vertical holes in millimeters (e.g., 200mm x 200mm, 400mm x 400mm, or 600mm x 400mm). The Equatech Universal Mount features an adjustable design that accommodates standard configurations up to the maximum width required for 100-inch panels. Step 2: Attaching the Brackets to the Back of the TV

Place the included spirit level across the top of the wall plate. Once the bubble is perfectly centered, use your pencil to mark the exact locations of four mounting holes (two on the left stud, two on the right stud).

(Typically 8mm or 10mm for concrete plugs; smaller bits for wood pilot holes) Phillips-head screwdriver Socket wrench or ratchet set Pencil and painter's tape

: Offers three distinct positions, including a flat (flush) mount or adjustable 8° and 10° tilt angles for better viewing.