|
|
|
|
|
For remote configuration over a network, follow this procedure:
Getting successfully requires a clear understanding of the software’s purpose, proper system preparation, and a methodical approach to installation and troubleshooting. While the software itself is not openly available for download from public websites, legitimate users can obtain it through Eltek’s authorised channels. Once installed, PowerSuite unlocks the full potential of your Eltek DC power system, allowing you to configure, monitor, and optimise your critical power infrastructure with confidence.
: Version 3.3 requires at least a 400MHz CPU, 96MB RAM, and Windows 98 or later. It is officially compatible with Windows 7 and 64-bit systems Installation Steps Exit all other programs and run the Allow the wizard to install Eltek USB drivers eltek power suite 33 download work
Find the Eltek Power Suite 33 in the list of available software. Ensure that you select the version compatible with your operating system.
Ensure you check the box to install the integrated USB-to-Serial drivers if prompted during the installation wizard. 3. Making PowerSuite 3.3 Work on Windows 10 and 11 For remote configuration over a network, follow this
+-----------------------------------+ +----------------------------------+ | Engineer PC | | Eltek Controller | | (PowerSuite 3.3 Active Session) | | (Smartpack / Smartpack2 / S) | | | | | | IP Address: 192.168.10.X | <=========> | Default IP: 192.168.10.20 | | Subnet Mask: 255.255.255.0 | Ethernet | Port: 23 (Telnet) / 80 (Web) | +-----------------------------------+ +----------------------------------+ Locating the Controller on a Network
Allow the wizard to install the (required for 64-bit systems and Windows 7+). : Version 3
If the app loads but shows no data, use these diagnostic parameters:
Progress through the prompts, accept the terms, and choose the default installation directory.