Deckma Omd11 Manual ((install)) Direct

Provides potential-free contacts for external processing (e.g., stopping the overboard discharge pump).

| Parameter | Specification | | :--- | :--- | | | DECKMA Hamburg OMD-11 | | Measurement Range | 0-30 ppm (trend indication up to 50 ppm) | | Accuracy | To IMO Resolution MEPC.60 (33) | | Regulatory Compliance | IMO MEPC.60 (33) | | Alarm Operating Points | 15 ppm (factory set), adjustable 2-15 ppm | | Alarm Time Delays | 2-20 seconds, independently adjustable | | Output Signal | 0 (4) - 20 mA, selectable | | Power Supply | 24 Volt AC/DC (other voltages available on request) | | Sample Temperature | +1° to 60° C | | Degree of Protection | IP 65 | | Dimensions (W x H x D) | 175 x 190 x 220 mm | | Weight | 3.5 kg |

Mount the instrument vertically on a bulkhead near the oily water separator (OWS). deckma omd11 manual

The is an oil-in-water monitor designed to meet International Maritime Organization (IMO) regulations for bilge alarm units (Resolution MEPC. 60(33)). It continuously monitors oily water discharge, primarily set to a 15 ppm limit. Manual & Technical Documentation

For more information on the Deckma OMD11 or to obtain a copy of the manual, please contact: Provides potential-free contacts for external processing (e

Several key components may need replacement during the device's lifetime.

A central blower draws sample air from the engine through pipes to the measuring head. The contains a strict warning: The blower must create a negative pressure of approximately 200 mm water column. Any leak in the sampling tube results in false low readings. 60(33))

A common mistake is assuming that the "quick start guide" shipped with the unit replaces the full manual. It does not. The full Deckma OMD11 manual runs over 100 pages and contains vital safety interlocks.

: The unit uses plug-in technology for its optical components and circuit boards, making component replacement relatively straightforward.

: Unscrew the top brass cap of the measuring cell.