Crdroid Bootimg Install

Tap → Apply from ADB .

Your phone screen will change to show the Fastboot/Bootloader interface. Verify the PC sees it by typing: fastboot devices Use code with caution.

Make sure the file is actually named exactly boot.img and is not saved as boot.img.img due to hidden file extensions on Windows. crdroid bootimg install

Flash the boot image using the following command:

Your Android device is your playground. By mastering these tools, you've just opened the gate to a world of endless possibilities. Happy flashing! Tap → Apply from ADB

Reboot directly into the newly flashed crDroid recovery environment using your device's physical button combination (usually Power + Volume Down) or by typing: fastboot reboot recovery Use code with caution.

If your serial number appears, proceed to flash the recovery/boot image: fastboot flash boot boot.img Use code with caution. Make sure the file is actually named exactly boot

This can happen if the active partition slots ( A and B ) get out of sync. The ROM installed to one slot, but the phone is booting from the other. This is an advanced issue, but a common fix is to manually flash the boot.img to at once using the --slot all flag, or to ensure that after the first ROM sideload, you reboot back into recovery before installing GApps to allow the slots to switch appropriately.

Then reflash the crDroid boot image.

Open a command prompt or terminal window inside this folder (Shift + Right Click > Open PowerShell/Command window). Step 2: Boot into Fastboot Mode