Cerwin Vega At-40 Specs Today

With a typical used market price of $150 to $300 per pair (plus re-foam costs), they are a fantastic value. Pair them with a 100W+ receiver, give them room to breathe, and you’ll understand why Cerwin Vega remains a legend.

5 Watts (Minimum) to 150 Watts RMS (Maximum).

The AT-40's acoustic performance is characterized by its clear, detailed highs and tight, controlled lows. The speaker's 12-inch woofers provide a robust low-end response, while the 1.5-inch high-frequency driver delivers crisp, accurate treble. The AT-40's frequency response is remarkably flat, with a deviation of only ±3 dB from 50 Hz to 15 kHz. cerwin vega at-40 specs

Unlike modern "audiophile" speakers that require hundreds of watts to produce moderate volume, the AT-40 was built for high efficiency. You could drive these to ear-bleeding levels with a modest 35-watt receiver.

Handling everything above 3,000 Hz, the dome tweeter provides crisp, bright highs. It is protected by an internal PTC (Positive Temperature Coefficient) device. If the speakers are pushed too hard and the tweeter begins to overheat, the PTC temporarily drops the signal to protect the voice coil from blowing, automatically resetting once it cools down. Amplifier Matching and Performance Realities With a typical used market price of $150

. It is characterized by the classic Cerwin-Vega "loud and punchy" sound, featuring the iconic red-surround woofer. Technical Specifications Speaker Type 3-way, Bass Reflex (Ported) Frequency Response 30 Hz – 22 kHz Power Handling 125 Watts (RMS/Continuous) Sensitivity 95 dB (1W @ 1m) Nominal Impedance Crossover Frequencies 400 Hz and 3,000 Hz Protection Self-resetting PTC (Tweeter protection) Dimensions (H x W x D) 730 x 365 x 320 mm (~28.7" x 14.4" x 12.6") Key Characteristics Driver Configuration

are legendary among rock fans, party hosts, and lovers of cinematic sound. The AT-40's acoustic performance is characterized by its

The 10" woofer is the heart of the AT-40. Unlike the massive 12" or 15" drivers found in AT-15 or AT-12 models, the 10" unit offers a compromise: tighter, faster bass with less boominess, while still able to move substantial air. The cast-frame basket reduces resonance, and the allows for significant cone travel without distortion.

The influences placement. Unlike front-ported speakers, the AT-40 needs some space behind it (at least 6-12 inches) to allow the port to breathe. Placing them flush against a wall will artificially boost bass but may cause muddiness or "chuffing" noise.

What those specs mean in practice

These speakers are designed to produce massive sound levels with relatively little amplifier power. Specification Frequency Response 30 Hz – 22 kHz Power Handling 125 Watts (RMS) Sensitivity 95 dB (1W/1m) Crossover Points 400 Hz / 3,000 Hz Protection Self-resetting PTC Dimensions 730mm H x 365mm W x 320mm D The "Proper" Review: The Rocker's Choice