To connect the CEM DT-171 to your computer, you must use the official software package, which includes both the data analysis program and the necessary USB drivers.
Extracts compiled tracking runs from device memory storage onto the workstation disk.
The software should automatically detect the logger. If it doesn't, ensure the LED on the logger is flashing correctly, indicating it is connected. Configure Parameters: Set the Sampling Rate (e.g., once every 5 minutes). Set High and Low Alarms for temperature and humidity. cem dt171 data logger software download hot
If your computer fails to recognize the data logger, try these quick fixes:
: Assign custom minimum/maximum thresholds that trigger the flashing hardware LEDs if violated. ⚙️ How to Download and Install the Software To connect the CEM DT-171 to your computer,
DT-171 Регистратор температуры и влажности, даталоггер
Whether you’re monitoring room temperature for a cozy home office, keeping an eye on humidity for your guitar or wine storage, or just curious about daily climate shifts — the CEM DT-171 data logger is your quiet little assistant. If it doesn't, ensure the LED on the
: If using Windows 10 or 11, you may need to temporarily disable driver signature enforcement to allow older USB drivers to install.
Click , accept the license agreement, and choose the installation path. Click Finish once the installation process completes. How to Configure the CEM DT-171 Data Logger
If you plug the device into your computer via USB and it is not recognized (shows as "Unknown Device"), you likely need the .
The software is more than just a driver; it is an analysis suite that allows you to: DT-170/171/171F/171C