Bradex | Bx60 Battery Charger Instructions Best |best|

Clean the battery terminals to ensure a good connection, but avoid contact with battery acid.

To make your battery last as long as possible and get the most from your Bradex:

If the charger fails to start, check the "flat" blade-style fuse located at the base of the unit. Replace it with a spare if it is blown. Lead-Acid Only: bradex bx60 battery charger instructions best

Related search suggestions...

: Includes a clear, easy-to-read analog ammeter to monitor the charging current in real-time. Safety Protections Clean the battery terminals to ensure a good

has triggered because clamps are backwards.

The Bradex BX60 is a no-nonsense little charger that makes keeping a ready stash of batteries painless — treat your cells gently, and they’ll keep your gadgets humming longer. Lead-Acid Only: Related search suggestions

effectively, follow these steps in order to ensure safety and prevent battery damage: Check Battery Fluid (Non-Sealed Only):

| Symptom | Likely Cause | Best Fix | | :--- | :--- | :--- | | Red light flashes forever | Battery is deeply dead (below 3V) | Try a "jump start" with another battery for 10 mins, then reconnect BX60. | | Green light instantly | Charger sees surface charge | Turn on headlights for 30 seconds (car off), then recharge. | | Unit clicks & flashes | Reverse polarity | Swap the clamps immediately. (Red to Pos, Black to Neg). |