Because this is a proprietary OEM board from 2008–2010, the best source for "extra quality" support is the .

Integrated Intel Graphics Media Accelerator X4500 (GMA X4500). Expansion Slots: 1 x PCI Express x16 (for graphics card upgrades). 1 x PCI Express x1. 2 x PCI slots. Storage: 4 x SATA II (3.0 Gb/s) connectors.

The Acer G41TAM Rev 1.0 utilizes DDR3 memory, which offers better efficiency than older DDR2 G41 variants. However, OEM G41 chipsets are notoriously picky about RAM architecture. Key Memory Rules 8 GB total (2 x 4 GB modules).

To use the headphone and microphone jacks on the front of your computer case, connect your case’s HD Audio cable to the header (typically located on the lower-left edge near the rear audio ports). This header uses a standard 10-pin block missing Pin 8: Pin 1: MIC L (Microphone Left Channel) Pin 2: AUD_GND (Ground) Pin 3: MIC R (Microphone Right Channel) Pin 4: HP_ON / NC Pin 5: LINE2_R (Headphone Right Channel) Pin 6: MIC_RET / Sense Pin 7: AF_OUT / Sense Internal Pin 8: No Pin (Key location) Pin 9: LINE2_L (Headphone Left Channel) Pin 10: HP_RET / Sense

: Features two 240-pin DIMM slots supporting DDR3 SDRAM . Most revisions support up to 8GB of total memory at speeds of 800/1066 MHz.

. It is manufactured by ECS (Elitegroup) and is closely related to the ECS G41T-M series Core Specifications

This comprehensive manual guide covers the specifications, front panel headers, jumper settings, and upgrade paths for the Acer G41TAM Rev 1.0 motherboard to help you maintain, troubleshoot, or upgrade your system. 1. Hardware Specifications Overview

Jumper cap bridges Pins 1 and 2 . The system retains BIOS settings. Clear CMOS Procedure: